Change Language

A.K. BITUMEN PRODUCTS
GST : 06AAUFA1551G1ZI

Our Products

Road Construction Products

Waterproofing Products

Waterproofing Application

Insulation Products

Water Base Bitumen Primer

Liquid Applied Waterproofing Coating

Anti Corrosive Products

Waterproofing of Swimming Pools and Water Tanks

Waterproofing of Swimming Pools and Water Tanks Specification

Usage
Waterproofing of Swimming Pools & Water Tanks

Thickness
1-2 mm (per coat)

VOC Content
Low VOC, environmentally friendly

Water Absorption
<1% after 24 hours

Application Method
Brush, Roller, or Spray

Curing Time
24-48 hours (depends on product and climate)

Service Temperature
-10°C to +80°C

Pot Life after Mixing
30-60 minutes at 25°C

Coverage
2-3 sq.m/litre per coat, depending on substrate condition

Surface Preparation
Clean, dry, free from dust, dirt or loose particles

Recoat Interval
6-8 hours

Type
Epoxy/Polyurethane/Hybrid Coating

Shelf Life
12 months (sealed original container)

Elongation at Break
>200% (varies with formulation)

Features
High adhesion, UV resistant, non-toxic, flexible and seamless membrane, chemical resistant, suitable for potable water

Application Temperature
+5°C to +40°C

Color
Blue, Grey, or as specified

Storage Conditions
Store in cool and dry place, away from direct sunlight

Bond Strength to Concrete
>1.5 N/mm²

Crack Bridging Ability
Can bridge cracks up to 2mm width

Waterproofing of Swimming Pools and Water Tanks Trade Information

Minimum Order Quantity
1000 Square Foots

Payment Terms
Paypal, Cash Against Delivery (CAD), Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque, Days after Acceptance (DA), Delivery Point (DP)

Delivery Time
7-10 Days

About Waterproofing of Swimming Pools and Water Tanks

Waterproofing for swimming pools and water tanks is essential for ensuring the integrity and longevity of these structures. Proper waterproofing prevents water leakage, which can lead to structural damage, reduce water loss, and maintain the overall performance of the pool or tank. Here is a detailed description of waterproofing solutions for swimming pools and water tanks:

1. Importance of Waterproofing for Swimming Pools and Water Tanks

Prevents Water Loss: In pools, waterproofing ensures minimal water seepage, which not only saves water but also reduces the need for frequent refilling.
Protects Structural Integrity: For both pools and tanks, waterproofing protects the concrete or masonry from damage caused by constant exposure to water, freezing and thawing cycles, and chemical reactions with pool water (like chlorine).
Prevents Leaks: It reduces the risk of leaks that can cause soil erosion around the pool or tank, and in the case of water tanks, ensures the water stays inside without leakage.
Increases Longevity: Proper waterproofing adds years to the lifespan of the pool or tank by shielding it from corrosion, mold growth, and deterioration.
Health & Safety: In water tanks, proper waterproofing prevents the contamination of water with external elements like dirt, insects, or pests. For pools, it also ensures that the pool environment remains clean and free from any possible water contamination.

2. Types of Waterproofing for Swimming Pools and Water Tanks

Liquid Membranes:
- Polyurethane: Often used for both pools and tanks, polyurethane coatings are flexible, durable, and resistant to UV degradation. It forms a seamless, waterproof layer that helps prevent leaks.
- Acrylic: Acrylic-based coatings are easier to apply and also provide UV protection, making them ideal for outdoor pools exposed to sunlight.
- Cementitious Coatings: These are often used for pools and water tanks made of concrete. The coating forms a strong, water-resistant barrier and is ideal for areas exposed to high

Superior Flexibility and Crack Bridging

Designed to accommodate structural movement, the coating can elastically stretch over cracks up to 2mm wide, ensuring uninterrupted waterproofing. This makes the solution ideal for swimming pools and water tanks where settling or expansion frequently occurs.

Environmental Safety and Low VOC Formula

This waterproofing system is formulated with low VOC content, creating a safer application environment and minimizing pollution. Its non-toxic standards make it perfectly suitable for potable water storage and sensitive locations.

Effortless Application and Fast Curing

Easy to apply using a brush, roller, or spray, the product accommodates various site needs. With a pot life of 30-60 minutes and a recoat interval of 6-8 hours, the coating cures in 24-48 hours, enabling prompt project turnaround and minimal downtime.

FAQ's of Waterproofing of Swimming Pools and Water Tanks:

Q: How do I properly prepare the surface before applying this waterproofing coating?

A: Ensure the concrete surface is clean, dry, and completely free from dust, dirt, or loose particles. Proper preparation improves adhesion and performance of the waterproofing membrane.

Q: What is the recommended application process for swimming pools and water tanks?

A: Mix the product as per instructions, then apply it using a brush, roller, or spray at a temperature between +5C to +40C. Maintain a coat thickness of 1-2 mm and allow 6-8 hours between coats for optimal results.

Q: When can the waterproofed surface be refilled with water after coating?

A: Allow the coating to cure for 24-48 hours, depending on product type and climate conditions, before refilling the pool or tank with water to ensure full membrane integrity.

Q: What benefits does this coating provide in terms of waterproofing performance?

A: The coating delivers high adhesion, bridges cracks up to 2mm, resists chemicals and UV exposure, and features negligible water absorption. Its flexibility, seamless finish, and suitability for potable water ensure long-lasting, safe protection.

Q: Where should the product be stored before use?

A: Store the sealed containers in a cool, dry place, away from direct sunlight to maintain its quality and shelf life, which is 12 months in original packaging.