सबसे लोकप्रिय उत्पाद
सà¥à¤µà¤¿à¤®à¤¿à¤à¤ पà¥à¤² à¤à¤° पानॠà¤à¥ à¤à¤à¤à¤¿à¤¯à¥à¤ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤
सà¥à¤µà¤¿à¤®à¤¿à¤à¤ पà¥à¤² à¤à¤° पानॠà¤à¥ à¤à¤à¤à¤¿à¤¯à¥à¤ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤ Specification
- Service Temperature
- -10°C to +80°C
- Pot Life after Mixing
- 30-60 minutes at 25°C
- Thickness
- 1-2 mm (per coat)
- Recoat Interval
- 6-8 hours
- VOC Content
- Low VOC, environmentally friendly
- Bond Strength to Concrete
- >1.5 N/mm²
- Usage
- Waterproofing of Swimming Pools & Water Tanks
- Water Absorption
- <1% after 24 hours
- Features
- High adhesion, UV resistant, non-toxic, flexible and seamless membrane, chemical resistant, suitable for potable water
- Color
- Blue, Grey, or as specified
- Application Temperature
- +5°C to +40°C
- Coverage
- 2-3 sq.m/litre per coat, depending on substrate condition
- Crack Bridging Ability
- Can bridge cracks up to 2mm width
- Curing Time
- 24-48 hours (depends on product and climate)
- Storage Conditions
- Store in cool and dry place, away from direct sunlight
- Shelf Life
- 12 months (sealed original container)
- Application Method
- Brush, Roller, or Spray
- Surface Preparation
- Clean, dry, free from dust, dirt or loose particles
- Elongation at Break
- >200% (varies with formulation)
- Type
- Epoxy/Polyurethane/Hybrid Coating
सà¥à¤µà¤¿à¤®à¤¿à¤à¤ पà¥à¤² à¤à¤° पानॠà¤à¥ à¤à¤à¤à¤¿à¤¯à¥à¤ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤ Trade Information
- Minimum Order Quantity
- 1000 Square Foots
- भुगतान की शर्तें
- , , , , , , ,
- डिलीवरी का समय
- दिन
About सà¥à¤µà¤¿à¤®à¤¿à¤à¤ पà¥à¤² à¤à¤° पानॠà¤à¥ à¤à¤à¤à¤¿à¤¯à¥à¤ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤
Superior Flexibility and Crack Bridging
Designed to accommodate structural movement, the coating can elastically stretch over cracks up to 2mm wide, ensuring uninterrupted waterproofing. This makes the solution ideal for swimming pools and water tanks where settling or expansion frequently occurs.
Environmental Safety and Low VOC Formula
This waterproofing system is formulated with low VOC content, creating a safer application environment and minimizing pollution. Its non-toxic standards make it perfectly suitable for potable water storage and sensitive locations.
Effortless Application and Fast Curing
Easy to apply using a brush, roller, or spray, the product accommodates various site needs. With a pot life of 30-60 minutes and a recoat interval of 6-8 hours, the coating cures in 24-48 hours, enabling prompt project turnaround and minimal downtime.
FAQ's of Waterproofing of Swimming Pools and Water Tanks:
Q: How do I properly prepare the surface before applying this waterproofing coating?
A: Ensure the concrete surface is clean, dry, and completely free from dust, dirt, or loose particles. Proper preparation improves adhesion and performance of the waterproofing membrane.Q: What is the recommended application process for swimming pools and water tanks?
A: Mix the product as per instructions, then apply it using a brush, roller, or spray at a temperature between +5C to +40C. Maintain a coat thickness of 1-2 mm and allow 6-8 hours between coats for optimal results.Q: When can the waterproofed surface be refilled with water after coating?
A: Allow the coating to cure for 24-48 hours, depending on product type and climate conditions, before refilling the pool or tank with water to ensure full membrane integrity.Q: What benefits does this coating provide in terms of waterproofing performance?
A: The coating delivers high adhesion, bridges cracks up to 2mm, resists chemicals and UV exposure, and features negligible water absorption. Its flexibility, seamless finish, and suitability for potable water ensure long-lasting, safe protection.Q: Where should the product be stored before use?
A: Store the sealed containers in a cool, dry place, away from direct sunlight to maintain its quality and shelf life, which is 12 months in original packaging.Q: What coverage can I expect from this waterproofing system?
A: Coverage ranges from 2 to 3 square meters per litre per coat, depending on the substrate condition and application technique.Q: Is the waterproofing coating environmentally friendly and safe for drinking water tanks?
A: Yes, it contains low VOCs, is non-toxic, and designed to be safe and suitable for potable water use, meeting environmental and health standards.
Tell us about your requirement
Price: Â
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
मोबाइल number
Email
अधिक Products in वॉटरप्रूफिंग अनुप्रयोग Category
टिन शेड और फैब्रिकेटेड बिल्डिंग की वॉटरप्रूफिंग
मूल्य की इकाई : Square Foot/Square Foots
न्यूनतम आदेश मात्रा : 1000
मूल्य या मूल्य सीमा : आईएनआर
माप की इकाई : Square Foot/Square Foots
किचन की वॉटरप्रूफिंग - बाथरूम और डूबे हुए क्षेत्र
मूल्य की इकाई : Square Foot/Square Foots
न्यूनतम आदेश मात्रा : 1000
मूल्य या मूल्य सीमा : आईएनआर
माप की इकाई : Square Foot/Square Foots
बिटुमिनस वॉटरप्रूफिंग वर्क सर्विस
मूल्य की इकाई : स्क्वायर मीटर/स्क्वायर मीटर
न्यूनतम आदेश मात्रा : 100
मूल्य या मूल्य सीमा : आईएनआर
माप की इकाई : स्क्वायर मीटर/स्क्वायर मीटर
बिल्डिंग रूफ टॉप वॉटरप्रूफिंग सर्विसेज
मूल्य की इकाई : स्क्वायर मीटर/स्क्वायर मीटर
न्यूनतम आदेश मात्रा : 100
मूल्य या मूल्य सीमा : आईएनआर
माप की इकाई : स्क्वायर मीटर/स्क्वायर मीटर
![]() |
A.K. BITUMEN PRODUCTS
सर्वाधिकार सुरक्षित.(उपयोग की शर्तें) इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित |












