सबसे लोकप्रिय उत्पाद
à¤à¤¿à¤à¤¨ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤ - बाथरà¥à¤® à¤à¤° डà¥à¤¬à¥ हà¥à¤ à¤à¥à¤·à¥à¤¤à¥à¤°
à¤à¤¿à¤à¤¨ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤ - बाथरà¥à¤® à¤à¤° डà¥à¤¬à¥ हà¥à¤ à¤à¥à¤·à¥à¤¤à¥à¤° Specification
- Crack Bridging Ability
- Up to 2 mm (when reinforced with mesh).
- Waterproofing Type
- Liquid-applied waterproof membrane system.
- Chemical Resistance
- Resistant to household cleaning chemicals and mild acids.
- Bonding
- Excellent adhesion to concrete, plaster, and masonry substrates.
- Thickness
- Recommended 1.0 to 1.5 mm dry film thickness after two coats.
- Coverage
- 1 to 1.5 kg/m² for two coats, depending on surface.
- Application Areas
- Kitchen, bathroom floors and walls, sunken slab areas, wet areas exposed to moisture.
- Drying Time
- Touch dry in 1-2 hours; fully cured in 24 hours at 27°C and 50% RH.
- Substrate Preparation
- Ensure surface is sound, clean, and free from dust, debris, oil, or loose materials before application.
- Shelf Life
- 12 months from date of manufacture.
- Pot Life
- 45-60 minutes at 27°C.
- Application Method
- Apply with brush, roller, or trowel in two successive coats.
- Storage Life
- 12 months if stored in original unopened containers.
- UV Resistance
- Not recommended for prolonged direct UV exposure.
- Re-coat Interval
- 4-6 hours between coats.
à¤à¤¿à¤à¤¨ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤ - बाथरà¥à¤® à¤à¤° डà¥à¤¬à¥ हà¥à¤ à¤à¥à¤·à¥à¤¤à¥à¤° Trade Information
- Minimum Order Quantity
- 1000 Square Foots
- भुगतान की शर्तें
- , , ,
- आपूर्ति की क्षमता
- प्रति दिन
- डिलीवरी का समय
- दिन
- नमूना उपलब्ध
- No
- पैकेजिंग का विवरण
- Rate charged per Square meter on actual measurement
- मुख्य घरेलू बाज़ार
- प्रमाणपत्र
- ISO प्रमाणपत्र & NSIC
About à¤à¤¿à¤à¤¨ à¤à¥ वà¥à¤à¤°à¤ªà¥à¤°à¥à¤«à¤¿à¤à¤ - बाथरà¥à¤® à¤à¤° डà¥à¤¬à¥ हà¥à¤ à¤à¥à¤·à¥à¤¤à¥à¤°
Kitchen waterproofing involves preparing the surface, sealing joints and cracks, and applying a waterproofing membrane or coating, often using materials like cementitious mixes or liquid membranes.
Here's a more detailed breakdown of the process:
1. Surface Preparation:
-
Remove any dirt, debris, grease, or loose material from the walls and floor.
-
Address any cracks or damage to the surface before applying waterproofing materials.
-
Make sure the surface is completely dry before starting the waterproofing process.
2. Sealing Joints and Seams:
-
Focus on areas where water is likely to penetrate, such as joints, seams, and around pipes and fixtures.
-
Use a high-quality sealant compatible with the waterproofing material and the specific application.
-
Apply the sealant smoothly and evenly to create a continuous, durable seal.
3. Waterproofing Application:
-
- Cementitious Waterproofing: Mix waterproofing chemicals with cement to create a paste, which is applied directly to walls and floors.
- Liquid Waterproofing: Apply liquid membranes (e.g., acrylic, polyurethane) using a brush, roller, or spray.
- Waterproofing Membranes: Use sheets of material (e.g., vinyl, polyethylene) as a barrier between the surface and water.
- Cementitious Waterproofing: Mix waterproofing chemicals with cement to create a paste, which is applied directly to walls and floors.
Highly Effective Waterproofing for Wet Interior Spaces
Designed to address moisture-prone areas like kitchens, bathrooms, and sunken slabs, this waterproofing solution delivers robust protection. Its liquid membrane forms a seamless layer, preventing water ingress even over minor cracks when properly reinforced. With rapid touch-drying and complete curing in just 24 hours, interiors can be safeguarded efficiently without extended downtime.
User-Friendly Application and Reliable Coverage
The membrane can be applied using a brush, roller, or trowel in two coats, achieving a recommended thickness of 1.0-1.5 mm. Each application covers 1-1.5 kg/m2, ensuring reliable protection on various surfaces. Clear guidelines for substrate preparation and recoating intervals guarantee ease of use for contractors and homeowners alike.
FAQ's of Waterproofing of Kitchen - Bathrooms and Sunken Areas:
Q: How should the substrate be prepared before applying the waterproof membrane?
A: Ensure the surface is sound, clean, and free from dust, debris, oil, or any loose materials. Proper surface preparation helps achieve strong adhesion and effective waterproofing.Q: What is the recommended process for applying this waterproofing membrane?
A: Apply the product in two successive coats using a brush, roller, or trowel, allowing 4-6 hours between coats. Reinforce with mesh for areas with up to 2 mm cracks, and ensure a total dry film thickness of 1.0-1.5 mm.Q: Where can this waterproofing system be used?
A: It is ideal for use in kitchens, bathroom floors and walls, sunken slab areas, and other interior wet areas exposed to regular moisture, but not in areas with prolonged direct UV exposure.Q: What are the benefits of using this waterproofing solution in bathrooms and kitchens?
A: It prevents water ingress, bridges cracks up to 2 mm (with mesh), resists household chemicals and mild acids, and offers excellent bonding to concrete, plaster, and masonry. This ensures long-term protection and durability in damp environments.Q: When can I recoat and when is the area fully protected?
A: Recoating can be done after 4-6 hours at 27C, with the membrane touch-dry in 1-2 hours and fully cured and effective after 24 hours under standard conditions.Q: What is the pot life and storage guideline for this product?
A: After mixing, the pot life is 45-60 minutes at 27C. For storage, keep the product in its original, unopened container; it remains usable for up to 12 months from the date of manufacture.Tell us about your requirement
Price: Â
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
मोबाइल number
Email
अधिक Products in वॉटरप्रूफिंग अनुप्रयोग Category
टेरेस की वॉटरप्रूफिंग - बालकोनी और पोडियम
मूल्य की इकाई : Square Foot/Square Foots
माप की इकाई : Square Foot/Square Foots
मूल्य या मूल्य सीमा : आईएनआर
न्यूनतम आदेश मात्रा : 2000
बिल्डिंग रूफ टॉप वॉटरप्रूफिंग सर्विसेज
मूल्य की इकाई : स्क्वायर मीटर/स्क्वायर मीटर
माप की इकाई : स्क्वायर मीटर/स्क्वायर मीटर
मूल्य या मूल्य सीमा : आईएनआर
न्यूनतम आदेश मात्रा : 100
रैपिड सेटिंग बिटुमेन इमल्शन
मूल्य की इकाई : किलोग्राम/किलोग्राम
माप की इकाई : किलोग्राम/किलोग्राम
मूल्य या मूल्य सीमा : आईएनआर
न्यूनतम आदेश मात्रा : 100
बिटुमेन रूफिंग फेल्ट
मूल्य की इकाई : रोल/रोल्स
माप की इकाई : रोल/रोल्स
मूल्य या मूल्य सीमा : आईएनआर
न्यूनतम आदेश मात्रा : 500
त्वरित पूछताछ
सम्पर्क करने का विवरण
ए.के. बिटुमेन उत्पाद
GST : 06AAUFA1551G1ZI
GST : 06AAUFA1551G1ZI
प्लॉट नंबर 130, गली नंबर 6, कृष्णा कॉलोनी, प्लॉट नंबर 79 के सामने, सेक्टर-25,फरीदाबाद - 121004, हरयाणा, भारत
श्री सुनील कुमार शर्मा
(साथी)
मोबाइल :+919212315948, +919212315946, +919555539513, +919310740541
जांच भेजें
 |
A.K. BITUMEN PRODUCTS
सर्वाधिकार सुरक्षित.(उपयोग की शर्तें) इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित |
